How we work out the figures

Where do Saudi imports of this product come from, and how large a gap would the biggest supplier leave? We use reported imports to answer the first question. We use an illustration to explore the second.

Reported trade data

Reported imports

We use UN Comtrade’s annual import values reported by Saudi Arabia, in US dollars, for each six-digit product group and trade partner. We use up to five available reporting years per product. The latest year is the most recent year with data for that product.

Add the partner values to get the total V. A partner’s share is its value divided by V. We use the World row to check totals and exclude it from the calculation. We display non-country entries such as Areas not elsewhere specified under Unspecified. Each original partner value counts separately in the HHI. Only countries are ranked as suppliers.

The six-digit groups are for comparing trade figures. For a declaration or tariff decision, use the current Saudi customs tariff to confirm the exact 12-digit item with ZATCA.

Retrieved · UN Comtrade· WCO’s Harmonized System, Chapter 84

Read on · ZATCA integrated customs tariff

Calculated indicator

How concentrated are the imports?

The top supplier share is the largest country’s share of the total. The top three share is the sum of the three largest country shares, or all country shares if fewer than three are available.

To calculate the Herfindahl–Hirschman Index (HHI), express each partner share as a percent, square it and add the results. The index runs from 0 to 10,000. A single source accounting for all imports gives 10,000.

High means HHI is above 2,500 or the largest country supplies at least 50%. Medium means HHI is at least 1,500 or the largest country supplies at least 30%, after ruling out High. Low covers the remainder. The page explains which condition led to the label.

The HHI cutoffs come from the 2010 US Horizontal Merger Guidelines, section 5.3. Using them for imports simplifies the pattern into three labels. The label describes how concentrated the reported import sources are. It gives no probability of a disruption.

Read on · 2010 US Horizontal Merger Guidelines, section 5.3

Illustration under stated assumptions

If the largest supplier stopped shipping

Call the lost import value v₁. The other reported import value is V − v₁. If that value rose by a fraction g, the share of the gap it could cover would be R(g) = min(1, g × (V − v₁) / v₁). The cap at one means coverage stops at 100%. Unspecified values are included in V, even though we cannot identify their suppliers.

We show low, central and high assumptions of 10%, 25% and 50% growth in import value. These are fixed assumptions chosen for illustration. They give no estimate of spare capacity. The calculation leaves out prices, quality, certification, lead times, contracts and substitution between product types. The result is an illustration under stated assumptions, not a forecast.

Calculated indicator

How much more have other suppliers shipped before?

For each other supplier country, compare its highest annual import value in the available five-year window with its value in the latest year. If a country is absent from an accepted year, we use zero for that country in that year. Missing product-years are skipped. Sum the positive differences to obtain historical headroom H. The headroom ratio is min(1, H / v₁).

This is derived from reported trade values. The supplier peaks can be in different years. The figures are in current dollars and reflect any changes in prices or product mix. They do not establish available capacity or a level of shipments these suppliers reached together.

General guidance

How makers and list matches are checked

A maker entry needs a dated public source that identifies the company and the products it manufactures in Saudi Arabia. A list match needs the official document, its date and page, and evidence that the written description covers the product. The owner must approve each entry before it is shown. A pending check leaves the status open. Ask the company about its exact product and consult the official list and tender documents directly.

A maker entry supports only the manufacturing claim in the cited source. Check the required origin documents for the exact model and the applicable local-content rules for any score.

A list match applies to the exact item and scope in the cited document, which may be narrower than this customs group. The current official list and tender documents set eligibility and evidence requirements.

Official Mandatory List of National Products

General guidance

What the figures leave out

Reported imports cover the customs group, which may combine products with different uses. We have no domestic production volumes, so we cannot calculate the share of Saudi demand met by imports. The country pattern can change, and annual trade values can be revised. Use the reporting year, retrieval date and original sources when comparing figures.

Product pages use rounded percentages and show dollar amounts in millions. Charts show their units, reporting years and sources. The downloadable indicators preserve more precision for checking calculations.

Worked example from the published data

Other taps and valves (848180) · Reporting year 2025

Use the latest reporting year for this product. Displayed values are rounded independently. The indicators use the underlying values before rounding.

Reported trade data

Total reported imports 2,195.7 USD million

Divide each value by the total and square the percentage. Add the result for each of the three named suppliers and the combined contribution of the remaining partners. Import values and shares are rounded for display. The calculation uses the underlying figures.

Trade partnerImport value (US dollars)Import shareHHI contribution
Italy$702,299,91532.0%1,023.09
China$306,503,14114.0%194.87
India$203,446,4779.3%85.86
Remaining partner contributions combined176.4

Calculated indicator

  • Largest supplier’s share 31.99%
  • Three largest suppliers’ combined share 55.21%
  • HHI 1,480.21
  • Concentration level Medium. The largest supplier’s share triggers this level.

Illustration under stated assumptions

The result is an illustration under stated assumptions, not a forecast.

Remaining reported imports 1,493.4 USD million. Multiply the remaining value by each assumed increase. Divide by the value from the largest supplier and cap coverage at 100%.

  • Low assumption (10%) · 21.26%
  • Central assumption (25%) · 53.16%
  • High assumption (50%) · 100%

Calculated indicator

Years available for the headroom calculation 2021, 2022, 2023, 2024, 2025

Add all positive differences from the other supplier countries’ peaks. Divide by the value from the largest supplier and cap the result at 100%.

Romania

  • Latest value (2025) · 119.3 USD million
  • Peak value (2024) · 197.7 USD million
  • Positive difference · 78.3 USD million
  • Sum of positive differences from all other countries in the calculation · 67.6 USD million
  • Historical headroom 145.9 USD million
  • Historical headroom relative to the largest supplier 20.77%

UN Comtrade · Open the original data query for this valves example· Retrieved 2026-11-18

Download data as CSV

The UN can revise a year after retrieval. The indicator checksum identifies this download. The source checksums identify the files used in the calculation. Source file checksums (CSV)

SHA-256 checksum of the downloadable CSV · 815299c10ebbc8dc839123828d407c195f7a582273d24a5c80b706697cb22d2d

Calculated indicator

Do the rankings change?

We rank products by gap coverage under each growth assumption and by HHI in each of the last three reporting years. We compare ranks using Spearman’s rank correlation. A value near 1 means similar order, near 0 means little rank agreement, and near −1 means the order is nearly reversed. Each comparison uses products with both values. A high replacement rank means a larger share could be replaced under the assumption. A high concentration rank means sources are less diverse. A negative correlation between these measures is therefore unsurprising. Tied products share the average of their ranks. The 100% cap can create ties as the assumed growth rises.

The order before capping does not change with growth. At higher growth assumptions more products tie at 100%, which changes their ranks. The table also compares the HHI rankings across years.

First rankingSecond rankingSpearman correlationProducts compared
Scenario growth 10%Scenario growth 25%0.99518
Scenario growth 10%Scenario growth 50%0.84018
Scenario growth 10%HHI for 2023-0.74818
Scenario growth 10%HHI for 2024-0.78918
Scenario growth 10%HHI for 2025-0.95518
Scenario growth 25%Scenario growth 50%0.84418
Scenario growth 25%HHI for 2023-0.74618
Scenario growth 25%HHI for 2024-0.77718
Scenario growth 25%HHI for 2025-0.95118
Scenario growth 50%HHI for 2023-0.79318
Scenario growth 50%HHI for 2024-0.70118
Scenario growth 50%HHI for 2025-0.80118
HHI for 2023HHI for 20240.75018
HHI for 2023HHI for 20250.82018
HHI for 2024HHI for 20250.81218

The change is the gap between the highest and lowest rank for products with results in every ranking in this group.

Largest changes across growth assumptions

Largest changes in annual HHI rankings

Retrieved 2026-11-18 · UN Comtrade

Method version

Version 1 introduced the import shares, concentration labels, supplier-stop illustration, historical headroom and rank comparisons described here.